Product Description

Product Description

YRT Standard Series

Thrust-centripetal combined structure can simultaneously bear bidirectional axial load, radial load and

overturning moment. Introduction holes are evenly distributed on the bearing, which can be directly fixed to the

bearing with bolts; the bearing has been preloaded before leaving the factory, and there is no need to adjust the

clearance for installation; this series is suitable for low speed, short operating cycle, high rigidity and precision

requirements occasions, such as rotary table, inHangZhou head, etc.

YRTS High Speed Series

The external structure and dimensions are the same as the YRT series, but the internal structure is different

from the YRT series, which determines that the speed limit of this series is higher than that of the YRT series, and

the friction torque is lower and uniform than that of the YRT series. For occasions, this series can be selected, such

as bearings for shafts driven by direct drive motors.

ZKLDF Thrust Angular Contact Ball Series

ZKLDF series thrust angular contact bearing can also bear combined load, but it has very high speed and

very low friction torque, and can ensure high rotation accuracy at the same time. It is very suitable for some

applications, such as high-speed rotary worktable, milling, grinding, honing head, precision measurement, testing

equipment and so on.

YRTM Integrated Angle Measuring System Turntable Bearing

The angle measurement system is integrated on the basis of the YRT standard bearing, which can realize the

accurate measurement of the angle, and the highest accuracy can reach 1 arc second, which is very suitable for

applications that have high requirements on the angle positioning accuracy.
 

Product Parameters

 

Detailed Photos

Installation Instructions

Compared with ordinary bearings, YRT series bearings have higher precision, so noting it when installing and using them, otherwise the precision and service life of the bearings will be seriously affected.

The bearing should be handled with care, and the connecting bolts ensure the safety of the bearing during transportation. In order to make the bearing alignment easier, loosen the coupling bolts of the bearing itself before installation, and tighten or remove it after installation.

According to the given tightening torque MA, using a torque wrench to install, following the "cross method",

and tightening step by step (as shown in the following picture). while rotating the bearing.

1. The first stage: MAX40%;

2. The second stage: MAX70%;

3. The third stage: MAX100%;
 

The fixing process of the outer ring is the same as that of the inner ring.

Notice:
1. Grade 10.9 or higher for mounting bolts.

2. The installation force can only be applied to the bearing ring to be installed, and it is not allowed to bear the force through the rolling elements.

3. During installation and removal, bearing assemblies cannot be disassembled or interchanged.

4. If the bearing is extremely difficult to rotate, loosen the mounting bolts and re-tighten them in 3 steps in a criss-cross sequence. Eliminate bearing deformation.

5. Do not knock the bearing during installation.
 

Certifications

Our Advantages

28 professional mechanical engineers
16 professional bearing analysis engineers
326 professional workers
83 sets of high precision CNC machine tools
32 sets of bearing testing equipment
13,000 square meters factory
 

 

After Sales Service

In the sales process, we will have professional sales personnel to answer customers' questions in time, update the production progress, sort out the photos and videos of packaging and delivery, provide customers with the required documents; We will also invite customers to visit our factory, and we will strive to provide solutions for customers' needs.

It is not the end after delivery, but a new beginning. We will update the logistics status and arrival date to customers in time.Ask customers for feedback on product quality, packaging, etc. at the first time, so as to improve the next cooperation. We will do our best to deal with any customer's problems with the product.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Feature: High Speed, Vacuum, Antimagnetic, Cold-Resistant, Corrosion-Resistant, Heat-Resistant
Sealing Gland: Sealed On Both Sides
Rolling-Element Number: Multiple-Column
Roller Type: Spherical Raceway
Material: Bearing Steel
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

cross roller bearing

Can you provide examples of scenarios where precision and rigidity are crucial with cross roller bearings?

Precision and rigidity are critical requirements in various scenarios where cross roller bearings are employed. These bearings excel in applications that demand accurate motion control, minimal deflection, and high stiffness. Here are some examples of scenarios where precision and rigidity are crucial with cross roller bearings:

  • Robotic Arm Joints:
  • Robotic arm joints require precise and repeatable motion for tasks such as pick-and-place operations, assembly, and welding. Cross roller bearings provide the necessary rigidity to withstand the loads and maintain accurate positioning, ensuring smooth and controlled movement of the robotic arm.

  • Machine Tool Spindles:
  • In machine tools, such as milling machines and lathes, the spindle's precision and rigidity are crucial for achieving accurate and high-quality machining. Cross roller bearings used in machine tool spindles enable precise rotation with minimal deflection, ensuring the accuracy and surface finish of the machined components.

  • Precision Optical Instruments:
  • In precision optical instruments like telescopes and microscopes, cross roller bearings are employed in stages and mounts to enable precise positioning and alignment. The rigidity of these bearings ensures stability and eliminates unwanted vibrations, allowing for clear and accurate observations or measurements.

  • Coordinate Measuring Machines (CMMs):
  • CMMs are used for dimensional inspection and measurement of complex parts. Cross roller bearings are crucial in the moving stages of CMMs, providing the necessary rigidity and precision to accurately position the probing system. This ensures precise and repeatable measurements with high accuracy.

  • Semiconductor Wafer Handling:
  • In semiconductor manufacturing, cross roller bearings are used in wafer handling robots and stages. These bearings enable precise and controlled motion during wafer loading, alignment, and transfer. The rigidity of cross roller bearings ensures accurate positioning of wafers, critical for the manufacturing of integrated circuits with nanoscale precision.

  • Aircraft Control Surfaces:
  • Aircraft control surfaces, such as ailerons, elevators, and rudders, require precise and responsive movement for safe and efficient flight control. Cross roller bearings are employed in the hinge mechanisms of these control surfaces, providing the necessary rigidity and accuracy to ensure precise control inputs and aerodynamic stability.

  • Surgical Robots:
  • In surgical robots, precision and rigidity are crucial for performing delicate and precise surgical procedures. Cross roller bearings are used in robotic joints and arms to enable precise and controlled movement of surgical tools. The rigidity of these bearings ensures accurate positioning and minimizes any unintended motion during surgery.

  • Solar Tracking Systems:
  • In solar tracking systems, which orient solar panels to maximize energy capture, precision and rigidity are essential for accurate tracking throughout the day. Cross roller bearings used in solar tracking systems provide the necessary stiffness to withstand wind loads and maintain precise alignment, optimizing energy generation from sunlight.

In summary, precision and rigidity are crucial in scenarios where cross roller bearings are utilized. Examples include robotic arm joints, machine tool spindles, precision optical instruments, coordinate measuring machines, semiconductor wafer handling, aircraft control surfaces, surgical robots, and solar tracking systems. In these applications, cross roller bearings ensure accurate motion control, minimal deflection, and reliable performance, allowing for precise operations, measurements, and control in various industries.

cross roller bearing

What role do seals and shields play in protecting cross roller bearings from contaminants?

Seals and shields play a crucial role in protecting cross roller bearings from contaminants. These protective devices are designed to prevent the entry of foreign particles, such as dust, dirt, moisture, and other contaminants, into the bearing system. They offer several functions that contribute to the overall protection and longevity of cross roller bearings:

  • Contamination Prevention:
  • The primary role of seals and shields is to prevent contaminants from entering the bearing. They create a physical barrier that blocks the passage of particles into the internal components of the bearing. This is particularly important in industrial environments where cross roller bearings are exposed to various contaminants that can cause damage and premature wear. By effectively sealing the bearing, seals and shields help maintain a clean and controlled operating environment, ensuring the reliable and optimal performance of the bearing.

  • Retention of Lubrication:
  • Seals and shields help retain the lubricant within the bearing, preventing its leakage and ensuring proper lubrication of the internal components. Lubrication is essential for reducing friction, minimizing wear, and dissipating heat within the bearing. The presence of seals or shields helps to retain the lubricating grease or oil, preventing its loss due to evaporation or contamination. This ensures that the cross roller bearing remains properly lubricated, promoting smooth operation and extending the service life of the bearing.

  • Protection against Moisture:
  • Moisture can be a significant source of contamination and can lead to corrosion and damage to the bearing components. Seals and shields act as a barrier against moisture ingress, preventing water or other liquids from reaching the internal parts of the bearing. By protecting against moisture, seals and shields help maintain the integrity of the bearing, reducing the risk of corrosion and preserving its performance and longevity.

  • Reduction of Friction and Wear:
  • Seals and shields also contribute to reducing friction and wear within the cross roller bearing. They provide an additional layer of protection and help minimize the contact between the rolling elements and the raceways. This reduces the frictional forces and wear on the bearing components, increasing their lifespan and improving overall efficiency. By reducing friction and wear, seals and shields help maintain the precision and performance of the cross roller bearing, ensuring smooth operation and minimizing energy losses.

  • Prevention of Lubricant Contamination:
  • Seals and shields play a vital role in preventing the contamination of the lubricant itself. They act as a barrier against external contaminants, such as dust and dirt, which can mix with the lubricant and degrade its quality. Contaminated lubricant can lead to increased friction, accelerated wear, and decreased performance of the cross roller bearing. The presence of seals and shields helps to maintain the cleanliness and integrity of the lubricant, ensuring its effectiveness in reducing friction and providing proper lubrication to the bearing components.

In summary, seals and shields play a critical role in protecting cross roller bearings from contaminants. They prevent the entry of foreign particles, retain lubrication, protect against moisture, reduce friction and wear, and prevent lubricant contamination. By effectively sealing the bearing and creating a controlled operating environment, seals and shields contribute to the longevity, reliability, and optimal performance of cross roller bearings in various applications and environments.

cross roller bearing

What are cross roller bearings and how are they used in various industrial applications?

Cross roller bearings are specialized types of roller bearings that utilize cylindrical rollers arranged in a cross configuration between inner and outer rings. This unique design allows for high radial, axial, and moment load capacities while maintaining a compact and space-saving profile. Cross roller bearings are commonly used in various industrial applications where precision, rigidity, and load-carrying capacity are critical. Here's a detailed explanation of cross roller bearings and their uses in different industrial sectors:

  • Robotics and Automation:
  • Cross roller bearings are extensively used in robotics and automation systems. These bearings provide high rigidity and precision, making them suitable for robotic joints, rotary tables, and linear motion systems. They can handle complex loads and moments, enabling smooth and accurate movement in robotic applications. Cross roller bearings are also preferred in industrial automation equipment such as pick-and-place machines, assembly systems, and semiconductor manufacturing equipment.

  • Machine Tools:
  • In machine tool applications, where high precision and rigidity are essential, cross roller bearings find wide usage. They are commonly employed in spindle units, rotary tables, and indexing heads of milling machines, lathes, and grinding machines. Cross roller bearings offer excellent rotational accuracy, enabling superior machining performance and surface finish. Their compact design allows for space optimization, making them suitable for machine tools with limited installation space.

  • Medical and Optical Equipment:
  • Cross roller bearings play a crucial role in medical and optical equipment that requires precise movement and stability. They are used in medical imaging devices, such as CT scanners and MRI machines, where the bearings support rotating components with high accuracy. Cross roller bearings are also found in optical instruments like telescopes, camera lenses, and precision measuring instruments, ensuring smooth rotation and precise positioning of optical components.

  • Aerospace and Defense:
  • In the aerospace and defense sectors, cross roller bearings are utilized in critical applications that demand high load capacity, rigidity, and reliability. They are used in aircraft landing gear systems, missile guidance systems, radar antennas, and satellite communication systems. Cross roller bearings are favored for their ability to accommodate both radial and axial loads, making them suitable for aerospace and defense applications with varying load requirements.

  • Industrial Robotics and Material Handling:
  • Cross roller bearings are integral components in industrial robotics and material handling equipment. They are commonly used in articulated robot arms, linear actuators, and conveyor systems. Cross roller bearings enable precise and smooth motion control, supporting heavy loads and withstanding dynamic forces. Their high stiffness and load capacity enhance the reliability and productivity of industrial robots and material handling systems.

  • Scientific and Research Instruments:
  • Cross roller bearings find applications in various scientific and research instruments that require precise positioning and smooth operation. They are used in electron microscopes, spectrometers, telescopes, and other scientific equipment. Cross roller bearings contribute to the stability and accuracy of these instruments, ensuring precise measurements and observations in research and scientific investigations.

In summary, cross roller bearings are specialized roller bearings that offer high load-carrying capacity, rigidity, and precision. They find diverse applications in industries such as robotics and automation, machine tools, medical and optical equipment, aerospace and defense, industrial robotics and material handling, as well as scientific and research instruments. The unique design and performance characteristics of cross roller bearings make them indispensable in industrial sectors that require precise motion control, high load capacity, and compact form factors.

China Standard Yrt Series Cross Cylindrical Roller Slewing Bearings Precision Crossed Bearings Made in China for Auto   with high qualityChina Standard Yrt Series Cross Cylindrical Roller Slewing Bearings Precision Crossed Bearings Made in China for Auto   with high quality
editor by CX 2024-04-10