Merchandise Description

Name Excavator Bearing BA168-1
Application Excavator
Structure angular get in touch with ball bearing
Size (d x D x B) mm 168x205x20mm
d(mm) 168
D(mm) 205
B(mm) 20
Brand NSK CZPT CZPT or as your requests
Condition New

Part NO. ID(mm) OD(mm) H(mm)
184BA-2251 184 226 21
180BA-2256 180 225 22
AC5033 250 330 37
AC5836 289 355 34
AC463240 230 320 40
AC4615 230 300 35
AC4629 230 290 27
AC4531 225 315 36
AC4631 230 310 40
AC423040-one 210 300 40
AC4630 230 300 35
AC6037-1 300 370 34
AC523438-1 260 340 38
BA152-2306 152 230 26
BA222-1WSA 222 273 26
BA220-6SA 220 276 26
BA220-6WSA 220 276 26
BA240-3ASA 240 310 32
BA289-1A 289 255 34
BA260-3A 260 340 38
BA260-4A 260 340 38
BA200-10 200 280 38
BA230-7T12SA 230 300 35
BA4531 225 315 40
BA300-5A 300 380 40
BA180-4WSA 180 250 33
200BA27V-2 200 270 33
210BA29V 210 295 35
230BA27V2 230 300 35
BA280-2SA 280 370 40
BA300-4WSA 300 395 52
BD130-1SA 130 166 34
BA205-1A 205 295 40
BA246-2A 246 313 32
BA250-4A 250 330 37
BA290-3A 290 380 42
120BA16 120 165 22
180BN19 180 250 33
B-SF4454PX1 220 295 33
B-SF4444PX1 220 295 33
SF4815VPX1 240 310 34
SF4831PX1 240 310 33.4
SF4852PX1 240 310 33
SF4826PX1 240 310 33
SF3607PX1 180 225 15
SF2812PX1 140 175 17.five
SF3227PX1 160 200 20
SF3235PX1 160 200 20
SF4007PX1 200 250 25
SF4019PX1 200 260 30
SF4860PX1 240 320 38.6
SF6037-1 300 370 34
SF6015PX1 300 372 36
260BA355-2 260 355 44
CR4411PX1 220 290 32
CR6016PX1 300 380 38
BA230-7T12SA 230 300 35
LL639249/10 196.eighty five 241.3 23.812
L540049/10 196.eighty five 254 28.575
LM739749 196.eighty five 257.175 39.688
544090/116 228.six 295.275 33.338
544091/118 231.775 300.038 33.338
L540048/ten 200 254 28.575
561904P6X 120 170 27
36990/20 177.eight 227.012 30.a hundred sixty five
4T-T7FC065ST 65 130 37
4T-T7FC055ST 55 115 34
T2ED045-1 45 95 36
R196Z-four 196.eighty five 241.three 23.812
AC563946AB 280 390 46
SF5235 260 330 35
AC4833      
HS5714 126 154 14
AC563946AB 280 390 46
BN220-1 220 280 28
BD130-sixteen 130 166 40
310BN420 420 310  
BA345-one 345 470 45
BA195-3A 195 280 36.5
BD155-3A      
BD155-4A 250 330 37
BD155-5A 165 210 54
BD155-6A 155 198 47
BA120-seven 230 300 35

Our major products:

 

 

Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Raceway: Spherical Raceway
Material: Cast Iron
Bearing Block Model: P

###

Customization:

###

Name Excavator Bearing BA168-1
Application Excavator
Structure angular contact ball bearing
Size (d x D x B) mm 168x205x20mm
d(mm) 168
D(mm) 205
B(mm) 20
Brand NSK NTN KOYO or as your requests
Condition New

###

Part NO. ID(mm) OD(mm) H(mm)
184BA-2251 184 226 21
180BA-2256 180 225 22
AC5033 250 330 37
AC5836 289 355 34
AC463240 230 320 40
AC4615 230 300 35
AC4629 230 290 27
AC4531 225 315 36
AC4631 230 310 40
AC423040-1 210 300 40
AC4630 230 300 35
AC6037-1 300 370 34
AC523438-1 260 340 38
BA152-2306 152 230 26
BA222-1WSA 222 273 26
BA220-6SA 220 276 26
BA220-6WSA 220 276 26
BA240-3ASA 240 310 32
BA289-1A 289 255 34
BA260-3A 260 340 38
BA260-4A 260 340 38
BA200-10 200 280 38
BA230-7T12SA 230 300 35
BA4531 225 315 40
BA300-5A 300 380 40
BA180-4WSA 180 250 33
200BA27V-2 200 270 33
210BA29V 210 295 35
230BA27V2 230 300 35
BA280-2SA 280 370 40
BA300-4WSA 300 395 52
BD130-1SA 130 166 34
BA205-1A 205 295 40
BA246-2A 246 313 32
BA250-4A 250 330 37
BA290-3A 290 380 42
120BA16 120 165 22
180BN19 180 250 33
B-SF4454PX1 220 295 33
B-SF4444PX1 220 295 33
SF4815VPX1 240 310 34
SF4831PX1 240 310 33.4
SF4852PX1 240 310 33
SF4826PX1 240 310 33
SF3607PX1 180 225 15
SF2812PX1 140 175 17.5
SF3227PX1 160 200 20
SF3235PX1 160 200 20
SF4007PX1 200 250 25
SF4019PX1 200 260 30
SF4860PX1 240 320 38.6
SF6037-1 300 370 34
SF6015PX1 300 372 36
260BA355-2 260 355 44
CR4411PX1 220 290 32
CR6016PX1 300 380 38
BA230-7T12SA 230 300 35
LL639249/10 196.85 241.3 23.812
L540049/10 196.85 254 28.575
LM739749 196.85 257.175 39.688
544090/116 228.6 295.275 33.338
544091/118 231.775 300.038 33.338
L540048/10 200 254 28.575
561904P6X 120 170 27
36990/20 177.8 227.012 30.165
4T-T7FC065ST 65 130 37
4T-T7FC055ST 55 115 34
T2ED045-1 45 95 36
R196Z-4 196.85 241.3 23.812
AC563946AB 280 390 46
SF5235 260 330 35
AC4833      
HS05154 126 154 14
AC563946AB 280 390 46
BN220-1 220 280 28
BD130-16 130 166 40
310BN420 420 310  
BA345-1 345 470 45
BA195-3A 195 280 36.5
BD155-3A      
BD155-4A 250 330 37
BD155-5A 165 210 54
BD155-6A 155 198 47
BA120-7 230 300 35
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Raceway: Spherical Raceway
Material: Cast Iron
Bearing Block Model: P

###

Customization:

###

Name Excavator Bearing BA168-1
Application Excavator
Structure angular contact ball bearing
Size (d x D x B) mm 168x205x20mm
d(mm) 168
D(mm) 205
B(mm) 20
Brand NSK NTN KOYO or as your requests
Condition New

###

Part NO. ID(mm) OD(mm) H(mm)
184BA-2251 184 226 21
180BA-2256 180 225 22
AC5033 250 330 37
AC5836 289 355 34
AC463240 230 320 40
AC4615 230 300 35
AC4629 230 290 27
AC4531 225 315 36
AC4631 230 310 40
AC423040-1 210 300 40
AC4630 230 300 35
AC6037-1 300 370 34
AC523438-1 260 340 38
BA152-2306 152 230 26
BA222-1WSA 222 273 26
BA220-6SA 220 276 26
BA220-6WSA 220 276 26
BA240-3ASA 240 310 32
BA289-1A 289 255 34
BA260-3A 260 340 38
BA260-4A 260 340 38
BA200-10 200 280 38
BA230-7T12SA 230 300 35
BA4531 225 315 40
BA300-5A 300 380 40
BA180-4WSA 180 250 33
200BA27V-2 200 270 33
210BA29V 210 295 35
230BA27V2 230 300 35
BA280-2SA 280 370 40
BA300-4WSA 300 395 52
BD130-1SA 130 166 34
BA205-1A 205 295 40
BA246-2A 246 313 32
BA250-4A 250 330 37
BA290-3A 290 380 42
120BA16 120 165 22
180BN19 180 250 33
B-SF4454PX1 220 295 33
B-SF4444PX1 220 295 33
SF4815VPX1 240 310 34
SF4831PX1 240 310 33.4
SF4852PX1 240 310 33
SF4826PX1 240 310 33
SF3607PX1 180 225 15
SF2812PX1 140 175 17.5
SF3227PX1 160 200 20
SF3235PX1 160 200 20
SF4007PX1 200 250 25
SF4019PX1 200 260 30
SF4860PX1 240 320 38.6
SF6037-1 300 370 34
SF6015PX1 300 372 36
260BA355-2 260 355 44
CR4411PX1 220 290 32
CR6016PX1 300 380 38
BA230-7T12SA 230 300 35
LL639249/10 196.85 241.3 23.812
L540049/10 196.85 254 28.575
LM739749 196.85 257.175 39.688
544090/116 228.6 295.275 33.338
544091/118 231.775 300.038 33.338
L540048/10 200 254 28.575
561904P6X 120 170 27
36990/20 177.8 227.012 30.165
4T-T7FC065ST 65 130 37
4T-T7FC055ST 55 115 34
T2ED045-1 45 95 36
R196Z-4 196.85 241.3 23.812
AC563946AB 280 390 46
SF5235 260 330 35
AC4833      
HS05154 126 154 14
AC563946AB 280 390 46
BN220-1 220 280 28
BD130-16 130 166 40
310BN420 420 310  
BA345-1 345 470 45
BA195-3A 195 280 36.5
BD155-3A      
BD155-4A 250 330 37
BD155-5A 165 210 54
BD155-6A 155 198 47
BA120-7 230 300 35

Types of Ball Bearings

If you're looking to purchase a new ball bearing, there are many different types available. Learn about Single-row designs, Ceramic hybrid bearings, and Self-aligning ball bearings. You can also choose from stainless steel or single-row designs. Then, read about the different types of materials available to you. You'll have an easier time making a decision. After all, you won't have to worry about maintaining your new ball bearing, since it will be maintained by your supplier.
bearing

Single-row designs

Ball bearings with a single-row design have a high load-carrying capacity. They are used in applications where high loads must be handled smoothly. A single-row design is a good choice when the material's properties require high load-carrying capacity but limited axial load capability. Single-row designs use two bearings with similar design features, but they have different mounting methods. Single-row designs can be adjusted either against one another to accommodate axial loads.
The single-row design is suitable for high-speed applications, but also has some disadvantages. The contact angle a is the angle between the radial plane and contact line. The larger the angle, the higher the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are suitable for higher axial forces. Single-row angular contact ball bearings have a single-row design and support high axial forces in one direction. Single-row ball bearings are available in both pressed steel and machined steel cages.
Angular contact ball bearings with a single row feature a cage made of fiber-glass reinforced polyamide 66. These are available in diameters up to 130 mm. Four-point angular contact ball bearings use brass, steel, or brass plate. They have good running properties and a low coefficient of linear expansion. Single-row designs are easy to mount and are widely available. Alternatively, they can be mounted with a universal match design, which allows them to be easily adjusted.
One-row angular contact ball bearings are generally not suitable for angular misalignments because they are unsuitable for compensation of angular misalignments. Misalignments cause internal forces in the bearing which reduce its radial load capacity and life expectancy. This type of bearing is not suitable for adjacent mounting as it increases the chances of misalignment. However, it is a suitable choice for applications where only one bearing is required per bearing position.

Ceramic hybrid bearings

While all-ceramic bearings are limited to very specialized applications, Si3N4-based hybrid bearings are finding use in a wide range of high-speed machines. Compared to steel, ceramics are less susceptible to centrifugal forces, which are directly proportional to the mass of the balls. Because Si3N4 replacement balls have a lower density than steel, these bearings reduce the stress placed on the outer race.
The benefits of hybrid bearings are clear: they allow for higher speeds and loads than full-ceramic bearings, and they require no lubrication. Because of their many benefits, many industrial equipment operators are switching to these innovative bearings. CBR is one company that specializes in ceramic hybrid bearings and can help you find the best product for your application. If you are thinking about purchasing ceramic bearings for your next machine, here are some things you need to know about them.
A ceramic ball bearing surface has an extremely low coefficient of friction, which is important for applications that require low friction and high speeds. Ceramic balls also have a higher hardness than steel balls, which increases their life. In addition to this, ceramic hybrid bearings have superior thermal properties, generating less heat even when spinning at high speeds. These properties make ceramic hybrid bearings an ideal choice for high-speed machinery, especially electric motors. They are also suitable for applications that operate under water.
A ceramic ball hybrid bearing is much less susceptible to temperature fluctuations and wear. Because they are essentially indestructible, ceramic balls do not generate wear particles from the adhesive wear. They can run at significantly higher speeds than steel balls. Ceramic balls are also more resistant to moisture. For this reason, grease is a recommended lubricant in most ceramic bearing applications. These lubricants offer superior protection against moisture and corrosion. Further, they are available in many types.
bearing

Self-aligning ball bearings

A self-aligning ball bearing is one type of self-aligning bearing. These bearings are recommended for use in flex shaft systems. Their self-aligning feature prevents them from misaligning when in use. They can be used in both single and multiple-joint systems. In addition to self-aligning ball bearings, these units also feature flex shafts.
These self-aligning ball bearings come in a variety of configurations, including cylindrical, round, tapered, and straight bore. Their inner ring is tapered to meet specific tolerances. They are suitable for operating temperatures ranging from -30°F to 120°F. Their wide range of applications allows them to be used in general machinery, precision instruments, and low noise motors. In addition, they are available in a variety of outside diameters, widths, and internal clearances.
Self-aligning ball bearings have two rows of balls and one common sphered raceway in the outer ring. This enables them to automatically compensate for angular misalignment, which may be caused by machining and assembly errors or deflections. Compared to spherical roller bearings, these self-aligning ball bearings generate less friction. They run cooler even at high speeds. Self-aligning ball bearings also offer free engineering support.
Self-aligning ball bearings are designed for difficult shaft alignment. They are double-row, self-retaining units, with cylindrical or tapered bores. These bearings are available in open and sealed designs, and can also be used in applications with misalignment. They are also available with an outer ring that rotates in relation to the inner ring. When it comes to shaft misalignment, self-aligning ball bearings are a great solution.

Stainless steel

Stainless steel is a metal that resists corrosion and is highly durable. Its corrosion-resistant and water-resistance properties make it a good choice for bearings in food and marine applications. Additionally, stainless steel has hygienic benefits. Here are some of the benefits of stainless steel ball bearings. Read on to learn more about these amazing bearings! We've included some of the most common uses for stainless steel.
Hardness is important in a ball bearing. Steel uses the Rockwell C scale to measure hardness. A grade 25 steel ball bearing is accurate to 25 millionths of an inch, while a grade five ceramic bearing is less than a half-inch round. Although roundness is important, it shouldn't be overemphasized, as the bearing surfaces may not be as accurate as the grade of the metal. And remember, a higher price tag doesn't mean a better product.
Stainless steel ball bearings are available in a variety of alloys. The alloys used in manufacturing a stainless steel ball bearing vary in hardness, strength, and ductility. Stainless steel ball bearings have high corrosion-resistance properties. Additionally, they have long lubrication lives. These benefits make them a popular choice for industrial applications. These bearings are easy to maintain, reduce replacement costs, and offer corrosion resistance.
The NTN Sentinel Series is a premium line of stainless steel bearings. The solid lube is NSF H1 registered and prevents grease from leaching into food. It is also corrosion-resistant and doesn't need to be coated. The seals and slinger create a water-resistant barrier between the steel ball and the lubricant. It also adds safety and security to the bearing.
bearing

Plastic balls

For applications where noise and weight are major concerns, plastic balls are ideal. These non-magnetic balls are ideal for MRI X-ray machines and sensors. They are also easy to lubricate, and are non-magnetic. A polymer ball bearing is the lightest of all three types. This makes them a good choice for many industries. Read on to learn more. This article will introduce some of the advantages of plastic balls for ball bearings.
Although ceramic ball bearings are more durable and offer many advantages, they are more expensive than plastic. Fortunately, plastic ball bearings offer a cheaper alternative. These bearings feature all-plastic races and cages. Depending on the application, plastic balls can be used in applications involving chemicals. In these cases, plastic ball bearings are available with a C160 grade, which is safe for use in temperatures below 176 deg F.
Medical devices often require precision specialty balls, which are made of glass, stainless steel, and plastic. These bearings must meet stringent cleanliness requirements. To meet the most stringent requirements, they must undergo ultrasonic cleaning. These bearings are available in plastic raceways, and are also available with glass or stainless steel balls. Polyethylene balls are lightweight and can be used in a variety of applications. They can be ordered in different sizes and tolerances to meet specific requirements.
Plastic balls for ball bearings are often mounted into other parts, such as plastic wheels, pulleys, and housings. They can be seamlessly integrated into other parts of a machine, which reduces assembly time and improves affordability. One important advantage of plastic bearings is that they are rust-resistant. As such, they can be used in harsh environments without causing any damage. If a piece of equipment is exposed to extreme temperatures, polymers are the ideal choice.

 wholesaler wholesaler
editor by czh 2023-02-06